GEARED HEAD DRILLING MACH

0 out of 5

Upright drilling machine

Technical Specifications

Electrical connection 400 V / 3 Ph ~50 Hz
Motor power 750 W
Drilling capacity in steel (S235JR) 25 mm
Continuous drilling cap. steel 20 mm
Throat depth 210 mm
Spindle stroke 85 mm
Spindle seat MT 3
Spindle speeds 200 - 2.440 min-1
Number of steps 12 Steps
Drilling table size length x width 330 x 290 mm
T-slot size (slot width) 14 mm, diagonal
Drilling table slewable +/- 45 degree
Drilling table rotatable 360 degree
Distance spindle - table max. 720 mm
Distance spindle - stand max. 1.230 mm
Stand work surface L x W 385 x 260 mm
Stand slot size 80 mm
Stand number of slots 16 mm
Stand slot distance 2
Column diameter 170 mm
Length x width x height 670 x 355 x 1.640 mm
Net weight 85 kg

Description

  • Robust bench drills and upright drilling machines with V-belt drive
  • Easy-to-operate safety switch according to IP 54 with undervoltage release and separate EMERGENCY-STOP push button
  • 400 volt types with right-/left-handed rotation
  • Drill depth stop
  • Precisely machined drilling table with diagonally running T-slots
  • Height adjustment of the drilling table via toothed rack
  • The drilling table can be inclined by ± 45° and turned by 360°
  • V-belt cover with safety switch
  • Aluminium die-cast spindle sleeve lever made of one piece with Softgrip handles
  • Solid, largely dimensioned base plate with slots, heavily ribbed at the rear side (for OPTIdrill B 33Pro T-slots)
  • Heavy type of the whole machine

Belt drive

  • High running smoothness thanks to ground multi-toothed follower
  • Best power transmission due to aluminium belt pulleys in connection with toothed GATES quality V-belt (from B 23Pro)

Drill head

  • Guaranteed true running accuracy </= 0.02 mm measured in the drilling spindle
  • Drilling spindle with precision ball bearings
  • High-quality quick-action drill chuck
  • Largely dimensioned, height adjustable protective screen with safety switch

Delivery Information

  • Morse taper MT 3 - B 16
  • Quick-action drill chuck (1 - 16 mm) B16
  • T-slots

R38,713.14
Add to basket
Add to wishlist

DRILL MACHINE GEARED HEAD 50M

0 out of 5

Heavy gear drilling machine with coolant system and threading mechanism as well as automatic spindle sleeve feed

Technical Specifications

Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 2.4 / 3.0 kW
Motor coolant pump 40 W
Drilling capacity in steel (S235JR) 50 mm
Continuous drilling cap. steel 45 mm
Thread cutting in steel (S235JR) M 42
Throat depth 375 mm
Spindle stroke 230 mm
Spindle seat MT 4
Spindle sleeve feed 6 steps, 0.05-0.3 mm/U
Spindle speeds 54 - 2,090 min-1
Number of steps 18 steps
Table work surface length x width 600 x 600 mm
T-slot size 18 mm, diagonal
Drilling table slewable and rotatable +/-90 degree
Distance spindle - drilling table (max.) 800 mm
Load drilling table 300 kg
Distance spindle - stand max. 1,300 mm
Stand work surface L x W 600 x 520 mm
Stand T-slot size 18 mm
Stand Number of T-slots 2
Stand T-Slots distance 280 mm
Column diameter 200 mm
Length x width x height 985 x 775 x 2,460 mm
Total weight 950 kg

Description

  • Heavy gear drilling machine with coolant system and threading mechanism as well as automatic spindle sleeve feed
  • Heavy, solid cast iron construction
  • Very smooth running due to ground oil-quenched gear wheels
  • High true running accuracy due to hardened and ground work spindle
  • Two-stage driving motor
  • Automatic toothed wheel lubrication via oil pump
  • Threading unit
  • Lockable main switch and motor protection switch
  • Machine luminaire integrated in the drill head

Automatic spindle sleeve feed

  • For deep drilling or pocket hole drilling, the coupler of the automatic spindle sleeve feed can be opened or closed at any time by actuating the spindle feed switch

Features:

Integrated drill drift

  • Easy tool change due to ejection mechanism

Spindle sleeve fine feed

  • Via handwheel

Chuck guard

  • Best possible protection of the user
  • Height-adjustable
  • Micro switch

Drilling table

  • Largely dimensioned
  • Solid
  • Precisely worked
  • Transversally running T-slots
  • Heavily ribbed at the rear side
  • ± 90° Rotation of 360° through it's own axis and about the column

Casting column

  • Thick-walled
  • High smooth running and stability
  • Column diameter 200 mm

Table height adjustment

  • Motor driven
  • Traverse speed 450 mm/min.

Coolant equipment

  • Coolant tank integrated in the base plate
  • Tank capacity 5 litres
  • Delivery volume 2 l/min.

Chip filter

  • cleans the coolant from rough components
  • according to the machine directive

Base plate

  • Usable as a working surface for extra high workpieces due to the  rotatable drilling table
  • Solid
  • Parallel running T-slots
  • Precisely machined surface

Heavy, solid cast iron construction 950 kg Smooth running and stable

Delivery Information

  • Quick-action drill chuck 1 - 16 mm
  • Morse taper MT 4/B16
  • T-slots

 

R190,957.50
Add to basket
Add to wishlist

DRILLING MACHINE GEARED HEAD

0 out of 5

Heavy geared upright drill with coolant system and threading mechanism.

Description

  • Heavy geared upright drill with coolant system and threading mechanism
  • Heavy, solid cast iron construction
  • Automatic toothed wheel lubrication via oil pump
  • Very smooth running due to ground oil-quenched gear wheels
  • High true running accuracy due to hardened and ground main spindle
  • Threading unit
  • Lockable main switch and motor protection switch

OPTIdrill B 40GSM additionally with automatic spindle sleeve feed

  • electrical
  • 2 steps, 0.1/0.2 mm/rev
  • For deep drilling or pocket hole drilling, the coupler of the automatic spindle sleeve feed can be opened or closed at any time by actuating the spindle feed switch

Features

Spindle speed

  • 9 selectable speeds via gear shifting lever at the front of the drill head
  • Two-stage driving motor
  • 18 speeds 50 - 1’450 min-1

Control cabinet

  • Clearly arranged structure
  • Generously dimensioned
  • Easy-to-attain
  • Zertifizerte Schalter von ABB
  • 24V AC
  • Zertifizierte Bauteile von Siemens oder Schneider

Drilling depth stop

  • Adjustable using the millimetre scale

Right-hand/left-hand rotation

  • when threading

Machine luminaire

  • Integrated in the drill head

Casting column

  • Thick-walled
  • High power absorption
  • Extremely robust

Drilling table

  • Largely dimensioned
  • Solid
  • Precisely worked
  • Transversally running T-slots
  • Heavily ribbed at the rear side
  • ± 90° Rotation of 360° through it´s
  • own axis and about the column

Chip filter

  • cleans the coolant from rough components
  • according to the machine directive

Coolant equipment

  • Coolant tank integrated in the base plate
  • Tank capacity 5 litres
  • Delivery volume 2 l/min.

Base plate

  • Solid
  • Parallel running T-slots
  • Precisely machined surface

Easy tool change due to integrated drill drift:

  • Insert drill drift
  • Press grip upwards
  • The taper mandrel is pressed out of the drilling spindle
Technical Specifications
Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 1.5 kW
Motor coolant pump 40 W
Drilling capacity in steel (S235JR) 35 mm
Continuous drilling cap. steel 30 mm
Thread cutting in steel (S235JR) M 24
Throat depth 350 mm
Spindle stroke 180 mm
Spindle seat MT 4
Spindle sleeve feed 2 steps, 0.1/0.2 mm/rev
Spindle speeds 50 - 1,450 min-1
Number of steps 18 steps
Table work surface length x width 560 x 560 mm
T-slot size 18 mm, diagonal
Drilling table slewable and rotatable +/- 90 degree
Distance spindle - drilling table (max.) 780 mm
Load drilling table 250 kg
Distance spindle - stand max. 1,320 mm
Stand work surface L x W 510 x 500 mm
Stand T-slot size 18 mm
Stand Number of T-slots 2
Stand T-Slots distance 150 mm
Column diameter 150 mm
Length x width x height 935 x 530 x 2,280 mm
Total weight 500 kg
B 40GSM

Delivery Information

  • Quick-action drill chuck 1 - 16 mm
  • Morse taper MT 4/B16

R89,424.00
Add to basket
Add to wishlist

OPTI GEARED HEAD DRILL 32MM

0 out of 5

Upright drilling machine with gear

Technical Specifications

Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 1,5 / 2,2 kW
Motor coolant pump 40 W
Drilling capacity in steel (S235JR) 30 mm
Continuous drilling cap. steel 26 mm
Throat depth 285 mm
Spindle stroke 125 mm
Spindle seat MT 4
Automatic spindle sleeve feed 0,1 / 0,15 / 0,2 mm
Spindle speeds 75 - 2.000 min-1
Number of steps 8 steps
Table work surface length x width 400 x 420 mm
T-slot size 14 mm, diagonal
Rotatable drilling table 360 degree
Distance spindle - table max. 820 mm
Distance spindle - stand max. 1.270 mm
Stand work surface length x width 420 x 644 mm
Stand T-slot size 14 mm
Stand number of t-slots 2
Stand T-slot distance 150 mm
Column diameter 115 mm
Dimensions 725 x 450 x 2.200 mm
Total weight 312 kg

Description

  • Bench drills and upright drilling machines with gear
  • High true running accuracy due to hardened and ground main spindle
  • Wide speed range
  • Heavy, solid cast iron construction
  • Adjustable drilling depth stop with millimetre scale
  • Low maintenance gear with grease lubrication

OPTIdrill DH 32GS:

  • Threading function
  • Automatic spindle sleeve feed
  • Coolant pump
  • Optional foot switch for operating the
  • thread cutting function and to switch right-left

Automatic spindle sleeve feed

  • For deep drilling or pocket hole drilling, the coupler of the automatic spindle sleeve feed can be opened or closed at any time by actuating the spindle feed switch

Features

Gear

  • 8 gear stageDH 32GS: 75 - 2’000 min-1

Integrated drill drift

  • Easy tool change due to ejection mechanism

Right-hand/left-hand rotation

Machine luminaire

  • Integrated in the drill head
  • Halogen lamp

Chuck guard

  • Best possible protection of the user
  • Height-adjustable
  • Micro switch

Casting column

  • Thick-walled
  • For high power absorption and stability

Drilling table

  • Largely dimensioned
  • Solid
  • Precisely worked
  • Transversally running T-slots
  • Heavily ribbed at the rear side

Coolant equipment

Chip filter

  • according to the machine directive
Optional foot switch for DH 32GS (Item No 3050032) Functions:
  • Thread cutting
  • Switching from right-hand/left rotation
Extent of Supply
  • Adapter MT 4-B16
  • 3034240

R61,618.73
Add to basket
Add to wishlist

OPTI GEARED HEAD DRILL 26MM

0 out of 5

Bench drilling machine with gear

Technical Specifications

Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 1,1 / 1,5 kW
Drilling capacity in steel (S235JR) 24 mm
Continuous drilling capacity steel (S235JR) 21 mm
Throat depth 235 mm
Spindle stroke 127 mm
Spindle seat MT 3
Automatic spindle sleeve feed -
Spindle speeds 8 Steps 75 - 2.900 min-1
Table work surface length x width 380 x 380 mm
T-slot size 14 mm, diagonal
Inclinable drilling table -
Rotatable drilling table 360 degree
Distance spindle - table max. 450 mm
Distance spindle - stand max. 610 mm
Stand work surface length x width 350 x 322 mm
Stand T-slot size 14 mm
Stand number of T-slots 2
Stand T-slot distance 120 mm
Column diameter 92 mm
Dimensions 600 x 380 x 1.300 mm
Total weight 158 kg

Description

  • Bench drills and upright drilling machines with gear
  • High true running accuracy due to hardened and ground main spindle
  • Wide speed range
  • Heavy, solid cast iron construction
  • Adjustable drilling depth stop with millimetre scale
  • Low maintenance gear with grease lubrication

Features Gear

  • 8 gear stage DH26GT/28GS: 75 - 2’900 min-1

Integrated drill drift

  • Easy tool change due to ejection mechanism

Right-hand/left-hand rotation

Machine luminaire

  • Integrated in the drill head
  • Halogen lamp

Chuck guard

  • Best possible protection of the user
  • Height-adjustable
  • Micro switch

Casting column

  • Thick-walled
  • For high power absorption and stability

Drilling table

  • Largely dimensioned
  • Solid
  • Precisely worked
  • Transversally running T-slots
  • Heavily ribbed at the rear side
Extent of Supply
  • Adapter MT 3-B16
 

R35,876.72
Add to basket
Add to wishlist