Default Welcome Msg
SHEET METAL WORKING MACHINE
Description
- Steel sheet processing machine 3 in 1. Round bending, folding and cutting.
- Perfect for the demanding user
- Modern structural shape of stable steel structure
- High design flexibility due to segmented bending rail
- Segments removable from the folding jaw
- Operation via two laterally placed levers
- Long support surface
- Extractable support arm for safe positioning of large format steel sheets
- Scissor table with embedded measuring tapes and right-angled stop on both sides
- Easy to adjust top -, rear and bottom cylinder
- Large, adjustable and easy to operate lever arms
- Extractable rear stop and front material support for safe positioning
Round bending
- Adjusting screws for the material thickness with scaling
- Ground bending rollers with wire insertion grooves on the bottom and front cylinder
Folding
- High quality folding jaws
- Holding-down device with spring
- Folding machine subdivided in segments
- Segments removable from the folding jaw 40 mm/ 50 mm/65 mm/100 mm/180 mm/255 mm/ 380 mm for folding of cartridges
Cutting
- Neat and burr-free cutting by means of top and bottom knife made of quality steel
Technical Specifications
| Material width (max.) | 700 mm |
| Round bending (min.) | 48 mm |
| Round bending (max.) | unbegrenzt |
| Steel sheet metal (S235JR) | bis 1 mm |
| Stainless steel | bis 0,5 mm |
| Aluminium/Copper | bis 1,5 mm |
| Brass | bis 1 mm |
| Gold/silver/tin plate | bis 1,5 mm |
| Unwinding cylinders-ø | 48 mm |
| Sheet thickness (max.) | |
| Aluminium/Copper | bis 1,5 mm |
| Steel sheet metal (S235JR) | bis 1 mm |
| Numbers of segments | 7 |
| Cutting capacity (max.) | bis 1 mm |
| Net weight | 290 kg |
- Adjustment rear stop
- Front material support
- Tool
R38,191.50
Add to basket
BANDSAW METAL DOUBLE MITRE
Description
- Metal band saw with double mitre of heavy type
- Heavy industrial type
- Low-noise running
- High cutting accuracy due to vibration-free running
- Two switchable speeds 36/72 m/min.
- Mitre adjustment to -60° by slewing the whole saw bow
- Combinable and individually adjustable hard metal and ball bearingguidings of the saw band
- With high-grade bimetallic saw band supplied as standard
- Limit stops exactly adjustable within an accuracy of a degree
- Chip brush
- Micro switch for automatic limit stop
- Roller support adjustable for long and heavy workpieces
- Fully equipped machine, the user can immediately start to work productively
- Simple and correct setting of the saw band tension by means of a manometer
- Ball bearing with hard metal plates for optimum cutting results
- Generously dimensioned
- Adjustable via handwheel
- Clamping the workpiece by means of the handy quick action lever
- Shiftable for large materials
- main switch
- Control light for operation
- Emergency-stop push button
- Switch coolant pump
- Speed selector switch
- Precise, infinitely variablesaw bow movement
- CE conformity of the electric system
- EMC filter (electromagnetic compatibility)
- Simple adjustment via feed gear control valve on the control panel
- Emergency-stop push button
- with scale
- Robust
Technical Specifications
| Length | 1750 mm |
| Width/depth | 1075 mm |
| Height | 1420 mm |
| Max. width/depth | 1415 mm |
| Max. height | 2000 mm |
| Net weight | 550 kg |
| Drive motor output | 2.2 kW |
| Coolant pump motor output | 50 W |
| Supply voltage | 400 V |
| Phase(s) | 3 Ph |
| Current type | ~ |
| Mains frequency | 50 Hz |
| Clamping range 0° round (full material) | 270 mm |
| Clamping range 0° quadratic (full material) | 230 mm |
| Clamping range 0° rectangle horizontal (full material) | 230 x 350 mm |
| Clamping range -45° round (full material) | 230 mm |
| Clamping range -45° quadratic (full material) | 170 mm |
| Clamping range -45° rectangle horizontal (full material) | 140 x 200 mm |
| Clamping range +45° round (full material) | 230 mm |
| Clamping range +45° quadratic (full material) | 200 mm |
| Clamping range +45° rectangle horizontal | 210 x 220 mm |
| Clamping range +60° round (full material) | 140 mm |
| Schnittbereich +60° quadrat (Vollmaterial) | 140 mm |
| Clamping range +60° rectangle horizontal | 140 x 220 mm |
| Feed | continuously variable |
| Saw band speed(s) | 36 / 72 m/min |
| Saw band length | 2925 mm |
| Saw band width | 27 mm |
| Saw band thickness | 0,9 mm |
| Cutting angle | -45 to 60 degree |
| Lifting the saw bow | manual |
R97,807.50
Add to basket
BAND SAW METAL OPTIMUM
Description
- Metal band saw for easy sawing
- Mitre saws from -45° to +60° via slewable saw bow
- Protector switch for saw band saw belt off and for belt housing
- Separate EMERGENCY-STOP push button
- Low voltage electronics 24 V
- Low-noise running
- Saw band guiding via ball bearing
- Three speed stages for a broad choice of materials
- Micro switch for automatic limit stop
- Scale good read for angle adjustment
- With high-grade bimetallic saw band supplied as standard
- Saw belt tension at the front adjustable via handwheel
- Adjustable material stop for series productions
- Quick-action vice for rapid workpiece clamping
- Switch for saw band saw belt off and for belt housing
- Grey cast-iron
- Slewable on both sides from -45° to +60°
Technical Specifications
| Length | 965 mm |
| Width/depth | 498 mm |
| Height | 978 mm |
| Max. length | 1085 mm |
| Max. height | 1300 mm |
| Net weight | 78 kg |
| Drive motor output | 1,1 kW |
| Supply voltage | 230 V |
| Phase(s) | 1 Ph |
| Current type | ~ |
| Mains frequency | 50 Hz |
| Clamping range 0° round (full material) | 128 mm |
| Clamping range 0° quadratic (full material) | 145 mm |
| Clamping range 0° rectangle horizontal (full material) | 100 x 145 mm |
| Clamping range -45° round (full material) | 90 mm |
| Clamping range -45° quadratic (full material) | 100 mm |
| Clamping range -45° rectangle horizontal (full material) | 70 x 85 mm |
| Clamping range +45° round (full material) | 90 mm |
| Clamping range +45° quadratic (full material) | 100 mm |
| Clamping range +45° rectangle horizontal | 70 x 85 mm |
| Clamping range +60° round (full material) | 45 mm |
| Schnittbereich +60° quadrat (Vollmaterial) | 45 mm |
| Clamping range +60° rectangle horizontal | 45 x 56 mm |
| Feed | stufenlos einstellbar |
| Saw band speed(s) | 22/31/55 m/min |
| Saw band length | 1638 mm |
| Saw band width | 13 mm |
| Saw band thickness | 0,65 mm |
| Cutting angle | -45 - 60 degree |
| Lifting the saw bow | manual |
Delivery Information
- Material stop
- Bi-metal saw band
- Substructure
R15,514.13
Add to basket
