Clear All

INTERNAL EXTRACT SET 4-32MM 5PC

0 out of 5

Internal Extractor Set 5 Pc For tightly-fitting ball bearings, bearing races, bushings and shaft seals. To use with impact bearing extractor or support brace. Titanium-nitride surface. Contents : 4pc Internal Extractors: Ø5-8.5mm - Ø8-15mm - Ø15-24mm - Ø25-36mm 1pc Sliding Hammer Puller M10 connecting thread

R2,212.31
Add to basket
Add to wishlist

SNAP RING PLIERS MINI 4PC

0 out of 5

Mini Snap Ring Plier Set 4 Pc Mini snap ring pliers suitable for work in tight areas. Works on S-Ring & S-Ring clips. Internal, External, Straight or angled ruggedly built of heat treated chrome molybdenum steel. Two internal snap ring pliers (One straight and one 45º angled) Two external snap ring pliers (One straight and one 45º angled Blister Carded

R223.56
Add to basket
Add to wishlist

DOOR HINGE AND HANDLE SET

0 out of 5

European Door Hinge / Handle Kit Finally, a compact solution to accessing the special fasteners found on the door hinges & door handles of VW/AUDI, Mercedes-Benz and Porsche. Includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes-Benz and VW door handle fasteners. 1pc Ratchet. 1pc T20 T-handle Driver. 1pc T30 STAR Screwdriver. 1pc T40 Bit. 1pc T45 Bit. 1pc 4mm 12 Point Bit. 1pc 8mm 12 Point Bit. 1pc 10mm 12 Point Bit.

R535.61
Add to basket
Add to wishlist

PICK UP TOOL/MAGNET 2-1

0 out of 5

2 - in - 1 Pick up Tool Spring-loaded, 4-prong steel claw. Claw tool for picking up small parts like screws, nails etc. Magnetic pick up tool for all small metal parts. Length 700 mm. Power of magnet: approx. 800 g. Claw opening up to 23 mm.

R176.99
Add to basket
Add to wishlist

BRAKE RE- FILLER 1 LTR

0 out of 5

Brake Re-filler 1000cc (1L) Helpful when bleeding of brake systems. Automatic refilling of the brake fluid tank. With valve and clamp. Container size: 1 litre One Man, fast, clean and simple operation.

R861.64
Add to basket
Add to wishlist

TRIM FASTENER REMOVE KIT

0 out of 5

Trim fastener and moulding removal set 5Piece Compact, lightweight and portable. Can be used on trim and mouldings inside or outside the vehicle. Includes wide, narrow, pull and furniture clip remover. Large support area to maximize. Tools are made of plastic to prevent damage to trim, mouldings, alloy wheels, or vehicle paint. Shaped to simplify trim removal. For car removal trim, door panels, upholstery and fascia dashboard.  

R192.51
Add to basket
Add to wishlist

HINGED CHAIN OIL WRENCH

0 out of 5

Hinged Chain Oil Wrench Hardened high-grade tool steel chain and body. Double-hinge construction for high clamping power. Ratchet-style action design works in both directions. Flexible handle enables to work in narrow spaces. Ideal for automotive oil filter replacement. Capacity: 60-160mm Chain Length: 520mm Heavy Duty Auto Tool

R735.89
Add to basket
Add to wishlist

SQUARE TRY 300MM

0 out of 5

Stainless Steel Try Square 300mm 30cm (12") Steel try square measuring tool 90º right angle ruler. Centimeters and Inches on both sides of ruler.  Ultra-precision and effortless operation. Scale marked in centimetres and inches. This tool is ideal for carpentry, metalworking and DIY use.

R23.29
Add to basket
Add to wishlist

FRONT WHEEL BEARING TOOL

0 out of 5

Front Wheel Bearing Tool Used to Replace the Front Wheel Bearing Without Removing theSteering Knuckle & Strut Assembly, As the Spindle Assembly is Not Removed There is No Need to Align the Front End, Applicable with Hydraulic Press

R2,207.66
Add to basket
Add to wishlist

CAMSHAFT PULLEY TOOL

0 out of 5

Universal Camshaft Pulley Holder Designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. While useful on most Asian overhead cam engines, it is most needed on transverse mounted V6 engines such as the VG30 used in Nissan Maximas as well as the 3VZFE  and lMZFE engines used in Toyota Camrys. Rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking device.

R414.52
Add to basket
Add to wishlist

PULLER SET UNIVERSAL HUB

0 out of 5

Universal Hub Puller Removes wheel hubs mounted on tapered axles and press fit rear drum brakes. Three adjustable legs can be extended to 190mm diameter bolt circle. Constructed of heat - treated forged alloy steel and fine-threaded 30mm hex drive center bolt. Designed for use on most passenger vehicles.

R1,401.91
Add to basket
Add to wishlist

IGNITION LOCK REMOVER

0 out of 5

Ignition Lock Remover This socket is specifically designed to remove & replace the retaining ring that secures the ignition switch in Mercedes Benz W129, W140, W202, W210 and W220 chassis vehicles.

R335.34
Add to basket
Add to wishlist