Clear All

WRENCH OIL FILTER 3 LEG

0 out of 5

3 Leg Oil Filter Wrench For use with ratchets, extension bars, flexible drives etc. Self gripping design for true universal fit Fits filter range 65 - 120mm Heavy duty knurled leg design 3/8" square drive with 3/4"male hex adapter Strong enough to remove the most stubborn of filters  

R154.63
Add to basket
Add to wishlist

TESTER PETROL COMPRESSOR

0 out of 5

Petrol Compression Tester Suitable for most petrol engine cars and light commercials to diagnose problems with petrol compression and checks condition of valves, piston rings, gaskets and cylinder heads. Ø57mm Gauge fitted with heavy rubber bumper, 150mm hose and M14/M18 fitting. Scale reads from 0-20bar (0-300psi). Includes 5 adapters and 2 thread chasers covering 4 plug thread sizes. M14 & M18 Plug Ports M14 & M18 Thread Chaser M10 & M12 Thread Chaser M10, M12, M14 & M18

R773.15
Add to basket
Add to wishlist

PLIER VALVE STEM SEAL L/S

0 out of 5

Extra Long Valve Stem Seal Ring Pliers Seal Removal Tool removes valve stem seals on overhead cam engines. Nose pliers have serrations in the tip for better grip on joints. Extra long neck designed to reach in confined area of ​​the joint to grasp for removal.

R512.33
Add to basket
Add to wishlist

VALVE GRINDING SET 2PC

0 out of 5

Valve Grinding Set 2 Piecec (Valve Lappers) For hand grinding flat head, unslotted valves Synthetic rubber vacuum cups are resistant to oil, grease and petrol 1-1/8” and 1-3/8” diameter cups for larger valves 5/8” and  13/16” diameter cups for smaller valves  

R107.12
Add to basket
Add to wishlist

SEPARATOR SET BALL JOINT 5 PC

0 out of 5

Tie-Rod / Ball Joint Splitter Set 5 Pc Use to separate ball joints and tie rods Drop forged heavy duty chrome vanadium Tie-rod spreader with 11/16" wedge opening Ball joint separator with 15/16" jaw opening Pitman arm wedge with 1-1/8" opening A 7-3/4" Knurled striking handle is included for use with conventional hammers. A 6-3/4" adapter handle is included for use with air hammer All forks are threaded to interchange with either handle

R572.87
Add to basket
Add to wishlist
M006022

PULLER GEAR 2 TON-2 AND 3 JAW

0 out of 5

2 & 3 Jaw Gear Puller Fine thread center bolt for smooth operation Capacity: 2 Ton Spread: 135mm Reach: 80mm Chrome Vanadium Jaws

R433.15
Add to basket
Add to wishlist

PULLER GEAR 5 TON-2 AND 3 JAW

0 out of 5

2 & 3 Jaw Gear Puller Fine thread center bolt for smooth operation Capacity: 5 Ton Spread: 175mm Reach: 140mm Chrome Vanadium Jaws

R707.94
Add to basket
Add to wishlist

PULLER GEAR 5 TON-2 JAW

0 out of 5

2 Jaw Gear Puller Fine thread center bolt for smooth operation Capacity: 5 Ton Spread: 150mm Reach: 85mm Chrome Vanadium Jaws

R498.35
Add to basket
Add to wishlist

BRAKE CALIPER TOOL 18 PC

0 out of 5

Universal Caliper Wind Back Kit 18 Pc Set of adapters for a wide range of vehicle applications. Magnetic socket adapter, suitable for push back & wind back brake pistons. Includes left and right handed thrust bolt assemblies. Precision made adapter plates with thrust bolt assembly and reaction plate. Constructed of high carbon steel for added durability, this caliper tool kit can be used with most makes of vehicle including GM, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes Benz, Mitsubishi, Nissan, Rover, Toyota, VW, Mazda, Saab, Subaru, Renault and Opel. Prevents damage to the piston and boot

R652.05
Add to basket
Add to wishlist

FREEWHEEL PULLER 10PC

0 out of 5

Freewheel Puller Set 10 Piece Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Ten Piece Set to Serve Fifteen Different Thread Applications. The M27 x P1.0 ia a Left Hand Thread. The Remaining Sizes are Right Right Hand Threads. All are Securely Stored in a Strong Mould Case. Contents: M14 x p1.5(R), M16 x P1.5(R), M18 x P1.5(R), M26 x P1.0(R), M28 x P1.0(R), M25 x P1.5(R), M22 x P1.0(R), M28 x P1.5(R), M19 x P1.0(R), M26 x P1.5(R), M22 x P1.5(R), M27 x P1.25(R), M20 x P1.0(R), M27 x 1.0(L), M24 x P1.0(R)

R791.78
Add to basket
Add to wishlist

HONER BRAKE CYLINDER 3 CLAW 30-85MM

0 out of 5

3 Claw Adjustable Cylinder Honer Adjustable Brake Cylinder Hone. For honing brake cylinders. Cylinder diameter: 30 - 85mm M006034 - Spare Honer Stone for M006027

R176.99
Add to basket
Add to wishlist

HONER BRAKE CYLINDER 3 CLAW 19-63MM

0 out of 5

2 Claw Adjustable Cylinder Honer Adjustable Brake Cylinder Hone. For honing brake cylinders. Cylinder diameter: 19 - 63mm M006031 - Spare Honer Stone for M006025

R154.63
Add to basket
Add to wishlist