Clear All

DIPSTICK MB TRANSMISSION

0 out of 5

Mercedes Benz Transmission Dipstick The tool is designed to measure the oil level of the transmission. Full length: 920mm Applicable transmission type: 722.7716.5

R381.92
Add to basket
Add to wishlist

PLIER FUEL LINE CONNECT

0 out of 5

Fuel Line Connect Plier For removal and replacement of the connections on the in-line fuel filter. Essential service tool for petrol engines Ergonomic grip handles Deep throat Application: Mazda, Ford, Mercedes Benz, VW, Audi, Fiat, Opel, GM, BMW

R558.90
Add to basket
Add to wishlist

PLIER FUEL LINE

0 out of 5

Fuel Line Plier Specially introduced fuel line pliers for use on three ended hose clips which are fitted to Audi, Seat, Skoda and Volkswagen fuel lines. Clamping Range (mm): 18 - 28 Spring loaded Wide jaw opening Great time saver Applicable: Seat, Audi, Skoda, VW etc.

R395.89
Add to basket
Add to wishlist

CRANKSHAFT/CAMSHAFT SEAL INSTALLER

0 out of 5

Crankshaft and Camshaft Seal Installer Kit 25 Piece Ideal for both crankshaft and camshaft seal. Quick and easy work for both installation work. Master kit includes wide size seal installers.

R3,954.22
Add to basket
Add to wishlist

BRAKE FLUID TESTER

0 out of 5

Brake Fluid Tester This brake fluid tester uses technology via the integrated circuitry to check for the moisture content within the brake fluid by measuring the electrical resistance. The 3 LED lights are used to show if the moisture content is low enough for the acceptable limits. The item uses a AAA 1.5Volt battery which is included. Green LED = Brake Fluid H2O < 1.5% Brake Fluid OK / (Also = Battery OK) Yellow LED = Brake Fluid H2O < 1.5%~3.0% Low Percentage of Water Advisory to Change Fluid within 6 months Red LED = Brake Fluid H2O > 3.0% Brake Fluid Change Required

R400.55
Add to basket
Add to wishlist

CRANK SEAL INSTALLER/REMOVER VW

0 out of 5

Crank Seal Installer/Remover VW This Crankshaft and Installer Tool can be used on Golf 2004, Touran 2004, Audi A3 2004, and 4 cylinder diesel engine applications including 2004 models 1.4i Turbo, 1.4-1.6 Direct Injection (Petrol), 1.9, 2.0SDI, 2.0 TDi, 2.0 and 2.0 Common Rails (Diesel)

Engine specific tool vital to ensure the correct alignment of main seal house crankshaft sensor. Seal housing carries the crankshaft sensor mounting. Used for fitting sealing flange with integrated sender wheel. 4-cyl. Diesel engine (4-valve)Applications: VW Passat 2004,  VW Golf 2004, VW Touran since 2003 Audi A3 4 cyl. since 2004
Diesel engines (4-valve) 1.9/2.0 SDI, 2.0 TDI and 2.0 common rail (Diesel) 1.4i Turbo 1.4/1.6 direct injection (Gasoline)

R4,238.33
Add to basket
Add to wishlist

CRANK SEAL INSTALLER AUDI

0 out of 5

Crankshaft Seal Installer Installation of the sealing flange with integrated pulse sensor wheel on the crankshaft flywheel side. For Volkswagen and Audi Group models with 16v 1.4/1.6 engines. Also used on Fiat engines. For 16v 1.4L 1.6 engines fitted to VW, Audi, Skoda, Fiat SEAT Arosa 1.4, Ibiza 1.4, Cordoba 1.4, Leon 1.4/1.6, Toledo 1.4/1.6, and Inca 1.4 16v SKODA Fabia 1.4, Fabia II 1.6, 1.4 and Octavia Roomster 1.4 16v VW Lupo 1.4/1.6, Polo 1.4/1.6, Polo Classic 1.4 Golf / Bora 1.4/1.6, 1.4 Beetle Caddy 1.4 16v

R3,618.88
Add to basket
Add to wishlist

CYLINDER LEAK DETECTOR SET

0 out of 5

Cylinder Leak Detector Set Kit allows easy identification of compression problems Detector measures exact leakage amount and locates leaks area To inspect the capacity of cylinder leakage, capacity 0-7 bar, while the cylinder system pressurize it must reach 7 bar. M10×1.0 Adaptor - M12×1.25 Adaptor - M14×1.25 Adaptor - M14×1.25 Extra Long Adaptor Compression Test Adaptor 1 - dsigned for 12mm spark plug. This Adaptor Suitable for following vehicles: BMW 335I E90, 2006 model,  N54 engines BMW Mini Cooper Mercedes Benz M156 (AMG model manufcatured from 2006 and onwards) Peugeot 207, 307 Renault 1.2 16 Valve Compression Test Adaptor 2 - 14mm spark plug specially use on V6 and 16 Valve engines with deep seated spark plug port. 25" rubber hose with Adaptor fit 14 and 18mm spark plug hole. Engine Code: N54 Year: 2006 to Current Model Codes: E60/E81/E82/E88/E89/E90/E91/E92/E93/F01/F10 Model:135i / 1M/ 335i/ X6 xDrive35I/ Z4 sDrive35i/ 740i

R3,353.40
Add to basket
Add to wishlist

FLOW METER ADAPTER SET

0 out of 5

Flow Meter Common Rail and  Injector Adapter Set 31 Piece A professional test kit that is used to monitor the Diesel fuel return comparison on a common rail diesel system between each individual injector, and monitoring up to 6 injector flows during each test sequence. 
This simple test is to be carried out on the low-pressure fuel side only and tampering with the potentially hazardous, highly-pressurised fuel is not required or recommended. 
This test requires the removal of the return flow pipes only and fitting the specific test lines with adaptors to the injectors requiring testing. This can quickly determine if an injector is functioning correctly. 

This kit is suitable for the following systems:  Bosch, Denso, Delphi, Siemens/VDO. 

All adaptors are in a sturdy red blow mould carry case which also includes fuel resistant easy to read calibration tubes / containers and flexible hoses. Up to 6 cylinders measured simultaneously Includes comprehensive quick connect fittings Includes blank off tubes and pinch off pliers Contains measurement tubes for short term test (crank only condition) and bottles for more accurate long term tests.

R3,083.27
Add to basket
Add to wishlist

DIESEL COMPRESSOR TESTER

0 out of 5

Diesel Engine Compression Tester Set 16 Piece This is the preferred test method and will avoid damage to the injectors and fuel system contamination. The compression tester is constructed of durable copper and steel and features a chrome plated gauge to get accurate measurements in harsh environments. Features include a swivel-end quick-coupler for easy change-out and connection of adapters. High quality Made of durable copper and steel material Swivel end quick coupler allows quick and easy connection of adapters 0-1000 PSI/0-70 bar gauge Includes adapters for most engines Application: Ford/navistar 6.9/7.3 Liter Engine; Audi, Volvo, VW, Cummins 5.9 Liter, M-b Cars & Trucks With 24 Mm Ports; V-185, 210, 225, 555, Vt-255, 555; Bacharach Adapter; M-b 18 Mm (prior To 1978); M-b 12 Mm (1978 And Up); Majority Of H-d Tractor Diesel Engines Including Allis Chalmers, Case, Deere, Ford, I. H., Mack, Onan, Waukesha;  Cummins V-6, V-8, V-12 Bmw 2.4 Liter, Lincoln (mark-vii) 1984 & 1985, Peugeot 12 Mm/18mm; Chevy Luv 1.8/2.2 Liter, Isuzu 1.8/2.2 Liter, Toyota 1.8 Liter; G. M. 4.3/5.7/6.2/6.5 Liter (turbo); Detroit Diesel 53, 71, 92, 110, 149, V53, V71; Cat D-336, 1674, 1676, 3406, 3408, 3412 (capsule-type Nozzles); Case, Cat, Deere, Waukesha

R7,582.41
Add to basket
Add to wishlist

DIESEL INJECTOR SET

0 out of 5

Diesel Injector/Lambda Sensor Socket Set - 14 Pc A comprehensive range of window sockets for the removal and installation of lambda sensors and diesel injectors. Sizes: 17-30mm Bi-Hex in various lengths, 20-22mm Hex. 20mm x 50mm axial drive. Chrome Vanadium

R2,929.57
Add to basket
Add to wishlist

SEPARATOR BEARING 105-200MM

0 out of 5

105 - 200mm Bearing Separator For easy removal of bearings & gears. Edges are beveled for insertion behind bearings. Made from high grade steel, for maximum strength and durability. Material: SCM440 (CR-MO) Material: SCM440 (CR-MO)

R2,300.81
Add to basket
Add to wishlist